| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Anyone see this plane before? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=1553 |
Page 1 of 1 |
| Author: | Don A [ Sat Apr 02, 2005 4:19 pm ] |
| Post subject: | |
Gottcha.  No actually, I found what appears to be a good buy on the Lie-Nielsen 102 Low Angle Block Plane. It is delivered for $75. It measures 5 1/4 x 1 1/4 and should be good for end grain work on neck sets. I went ahead and bought one and thought I'd just pass it along. The rest of the site is worth checking out as well.
Lie-Nielsen 102 Low Angle Block Plane |
|
| Author: | JJ Donohue [ Sat Apr 02, 2005 4:38 pm ] |
| Post subject: | |
Don...Nice to see you didn't put pieces of electrician's tape all over it! 
I recently bought one of these as well...(the Bronze model). You're gonna love it! |
|
| Author: | Mattia Valente [ Sat Apr 02, 2005 8:30 pm ] |
| Post subject: | |
That's the same price Woodcraft has them at, so you can avoid shipping altogether if you've got one close by. Just one question: is bronze simply a better metal than steel for planes? Is there a particular reason those models are pricier? |
|
| Author: | Don Williams [ Sat Apr 02, 2005 11:51 pm ] |
| Post subject: | |
I could be wrong, but perhaps bronze has more mass than iron? Not sure, but that would make some sense. I have the bronze one, and it's quite a nice little plane. |
|
| Author: | tippie53 [ Sun Apr 03, 2005 1:33 am ] |
| Post subject: | |
I have a stanley low angled plane. A great little tool. While I do admit I am not much at using them anymore I have quite a plane collection. A good plane well sharpened makes music when used. I may have to get them out and sharpen them up. |
|
| Author: | Jeff Doty [ Sun Apr 03, 2005 2:18 am ] |
| Post subject: | |
Cool Don. Thanks for the link, they seem to have good prices. Sometimes if I am really busy, I would rather order the item on line and have it delivered. Saves on gas money too! Jeff |
|
| Author: | Dave-SKG [ Sun Apr 03, 2005 5:18 am ] |
| Post subject: | |
[QUOTE=JJ Donohue] Don...Nice to see you didn't put pieces of electrician's tape all over it!
I recently bought one of these as well...(the Bronze model). You're gonna love it! [/QUOTE] I too Thank You for the link...I also have the Bronze model...I think I paid something like $125 for it? don't remember. But at this price ( and delivered) I could have almost bought two. I guess I'll have to buy one just because it's such a good deal...you guys are going to put me in the poor house with all these great finds! Hey Thanks! p.s. I asked them to ship it in a plain box and put black electricians tape on the sensitive area's 
|
|
| Author: | CarltonM [ Sun Apr 03, 2005 3:52 pm ] |
| Post subject: | |
I've got one of the L-N bronze low-angles, too. It is nice, but I'd suggest thinking twice before buying a bronze plane. Bronze is a much softer metal than iron. It's easily scratched, and, when dropped, easily dented (I don't think you'll have to ask how I know that!). Bronze looks and feels much nicer than iron, though, and the L-N is a smooth operating tool. Carlton |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|